A stone bath is a stunning focal point in any bathroom, but it may quickly lose its lustre if not properly cared for. Stone baths made of stone need frequent maintenance to remain in excellent shape and free of markings, scratches, and other types of damage. To ensure that your stone resin bath stays a focal point in your bathroom, we’ve put together a guide to care for your stone bath with simple to follow guidelines.
Cleaning a stone bathtub
If you follow a few simple methods, you can maintain your brand-new stone bath looking like new every time you take a dip in the tub. When you get out of the bath, use a clean towel to rinse and dry the tub’s surface. Rinsing will prevent soap scum from accumulating on the bath’s surface, which may ultimately discolour the surface. It’s possible to clean a stone composite bath using soapy water, ammonia-based cleaners, and other common surface cleaners.
If your stone resin bath is coloured, the amount of cleaning it requires will be determined by the colour of the stone resin. The darker the stone, the more noticeable the scratches will be, so you’ll need to really clean it more often to really keep it looking its best. People suggest washing and drying after each usage, even on lighter shades of stone.
Help! The stone bathtub has developed some discolouration.
Users often wonder why their stone bath’s surface has become uneven and splotchy after prolonged usage. An unappealing coating is left behind when hard water is permitted to dry on the bath’s surface, making it seem shabby and unclean. It’s simple to get rid of the film; follow these instructions.
- To use, wet a clean, moist towel and lather up some minimally abrasive cream cleaner.
- Start from the front and work your way backwards before rubbing the cleaner from side to side over the blotchy region. The overlapping circles will guarantee that the whole surface is covered.
- Once the area has been thoroughly coated, use clean water to rinse it off. If the blotchy markings persist, apply extra pressure to the same method as before.
- Wash and dry the bath after each usage going ahead, and don’t forget to do so!
How to clean a stone bath of blemishes
Stone baths are subject to more wear and tear as they age. Scratches in your stone bath aren’t always a reason for concern since stone is a regenerative material, but there is a solution to remove them!
- The first step is to clean the affected area using the methods outlined above thoroughly. You can get to the scratches underneath by removing any coating from the surface of the bath.
- Ensure the surface is moist before scrubbing it with the sponge scourer, rather than letting it air dry. Don’t push down too hard! Scratches may emerge more often if the surface is pressed.
- As you massage the scratch, switch between a straight line and a horizontal motion to make sure you cover the whole region. While you’re doing this, rinse the pad to get rid of any residue that’s built upon the sponge.
- Before rinsing and drying the surface, ensure the scratch has been eliminated. Whether you wait until it’s dry, you’ll be able to see if the area you treated has disappeared into the background. If the difference is stark, you may want to repeat the process on a more extensive section of the stone bath to make it less noticeable.
How to keep your stone bath from being damaged
Your stone bath needs protection from more than just scratches and discolouration. Because of the nature of the stone composite bath surface, it must be safeguarded from the heat at all times, which means no hair straighteners or tongs should be used in the bathroom with it.
In the same way, if you’re doing any bathroom DIY or decorating, make sure your bath is covered to minimise chemical harm. If you accidentally spill paint remover or a powerful surface cleaner, promptly wash the affected area with clean water to avoid lasting damage.
When you get out of the bath, establish a regular practice to help preserve the appearance of your stone tub. In this case, a little goes a big way.
